Produktbeschreibung
Mikrotiks RB411AR verfügt über eine integrierte 802.11b/g Wireless Karte mit MMCX Konnektor. Man verfügt damit nicht nur über eine fertige Wireless Lösung, sondern zudem auch noch über einen miniPCI Karten Slot um z.B. noch eine weitere Wireless Karte zu verbinden. Es ist also möglich eine Verbindung zu einem AP aufzubauen und gleichzeitig seine Umgebung mitzuversorgen. Es verfügt über dieselben Befestigungslöcher wie die RB411 Serie was einem die Möglichkeit eröffnet, in einem Outdoor-Gehäuse ein anderes Board der Serie in Minuten auszutauschen.
-
Specifications
| Details | |
|---|---|
| Product code | RB411AR |
| Architecture | MIPSBE |
| CPU | AR7161 |
| CPU core count | 1 |
| CPU nominal frequency | 300 MHz |
| License level | 4 |
| Operating System | RouterOS |
| Size of RAM | 64 MB |
| Storage size | 128 MB |
| Storage type | NAND |
| Tested ambient temperature | -40°C .. +70°C tested |
Powering
| Details | |
|---|---|
| Max Power consumption | 14W |
| PoE in | Passive PoE |
| PoE in input Voltage | 10-28 V |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 10-28 V |
Wireless
| Details | |
|---|---|
| Wireless 2.4 GHz number of chains | 1 |
| Wireless 2.4 GHz standards | 802.11b/g |
| Wireless 2.4 GHz chip model | AR2417 |
Ethernet
| Details | |
|---|---|
| 10/100 Ethernet ports | 1 |
Peripherals
| Details | |
|---|---|
| MiniPCI slots | 1 |
| Serial port | RS232 |
Other
| Details | |
|---|---|
| Voltage Monitor | Yes |
-
Ethernet test results
| RB411AR | AR7130 100M 1 port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none | 8.1 | 98.6 | 23.5 | 96.3 | 97.3 | 49.8 |
| Bridging | 25 bridge filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 41.0 | 21.0 |
| Routing | none | 8.1 | 98.6 | 23.5 | 96.3 | 79.4 | 40.7 |
| Routing | 25 simple queues | 8.1 | 98.6 | 23.5 | 96.3 | 67.8 | 34.7 |
| Routing | 25 ip filter rules | 8.1 | 98.6 | 23.5 | 96.3 | 24.7 | 12.6 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Downloads