Hersteller: MikroTik

MikroTik RB4011iGS+RM

Art.Nr.: RB4011iGS+RM

Hersteller: MikroTik

224,90 EUR
incl. 19 % USt

  • Sofort versandfähig Sofort versandfähig
  • Lagerbestand 42
  • Gewicht 1,2 kg


Beschreibung: Mikrotik RB4011iGS+RM

Mikrotiks RB4011 Serie - Leistungstarker Router mit 10 Gigabit Ports, einem SFP+ 10Gbit Interface und IPSec Hardwarebeschleunigung - all das, zu einem sehr guten Preis. 

Das RB4011 nutzt einen Quad Core Cortex A15 CPU, derselbe, welcher auch in dem Carrier Grade RB1100AHx4 verbaut ist. Das Gerät ist ausgestattet mit 1GB RAM und verfügt über PoE out auf Port 10. Verbaut ist die Hardware in einem professionell ausschauenden Metallgehäuse, welches in mattem Schwarz gehalten ist. 


  • 1x RB4011iGS+RM
  • 1x 24V 1.5A Netzteil
  • 2x 1U Rackmount ears


Product code RB4011iGS+RM
Architecture ARM 32bit
CPU AL21400
CPU core count 4
CPU nominal frequency 1400 MHz
Dimensions 228 x 120 x 30 mm
License level 5
Operating System RouterOS
Size of RAM 1 GB
Storage size 512 MB
Storage type NAND
Tested ambient temperature -40°C .. +70°C



PoE in 802.3af/at
PoE out Passive PoE up to 57V
PoE in input Voltage 18-57 V
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 12-57 V
Max out per port output (input > 30 V) 400 mA
Max out per port output (input < 30 V) 600 mA
Max total out (A) 600 mA
Max power consumption 47
Max power consumption without attachments 19W



10/100/1000 Ethernet ports 10



SFP+ ports 1



Serial port RJ45



PCB temperature monitor Yes
Voltage Monitor Yes

Ethernet test results

RB4011iGS+RM AL21400 1G/S+ all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 806,4 9,792.9 2312,9 9,473.6 5509,7 2,821.0
Bridging 25 bridge filter rules 806,4 9,792.9 1037,4 4,249.2 1153,2 590.4
Routing none (fast path) 806,4 9,792.9 1923,3 7,877.8 5092,3 2,607.3
Routing 25 simple queues 806,4 9,792.9 1046,6 4,286.9 960,3 491.7
Routing 25 ip filter rules 593,7 7,209.9 625,2 2,560.8 564,6 289.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results